contraction allowance

基本解釋收縮袷度

網絡釋義

1)contraction allowance,收縮袷度2)allowance,袷度3)molding allowance,造模袷度4)finishing allowance,加工袷度5)machining allowance,切消袷度6)shrinkage temperature,收縮溫度

用法和例句

The shrinkage temperature(Ts) of the leathers tanned by the above agents were tested.

用紅外光譜(FT-IR)分別證實了它們特有的官能團的存在;并對這些無鉻鞣劑的分子結構進行計算機模擬,嘗試從分子尺寸的角度解釋收縮溫度的差異。

When the determination criterion of the shrinkage temperature of leather is carried out,we find that there is too many problems.

皮革收縮溫度是檢驗皮革產品耐用性能的一個重要指標,但是在執行QB/T2713-2005《皮革收縮溫度的測定》時,卻發現存在很多問題。

At the same time,the shrinkage temperature(Ts),physical and machine properties of the leather have been tested.

同時對鞣后革的收縮溫度、物理機械性能等進行了測試。

Research on shrinkage temperature control in shrinking film packaging based on adaptive fuzzy method

熱收縮膜收縮溫度的自適應模糊控制研究

An Experimental Study on Temperature Dependence of Autogenous Shrinkage of High Strength Mortar;

高強水泥膠砂自收縮溫度依存性的實驗研究

Design Detection Instrument for Shrinking Temperature of Leather Based on Fuzzy PID

基于模糊PID皮革收縮溫度測定儀控制系統設計

temperature contraction of pipes

管道因溫度變化收縮

The initial shrinkage temperature and the shrinkage change little with the increase of heating rate.

升溫速率增大,坯片開始收縮的溫度及收縮率幾乎不變。

When the cellular aluminum alloy is heated above710(° C), volume shrinkage occurs and the ratio of volume shrinkage increases with the temperature.

胞狀鋁合金在高于710°的溫度下加熱,其體積發生收縮,且收縮率隨溫度升高而增大.

Shrinkage stress was found to increase linearly with cure temperature.

我們發現收縮應力隨固化溫度直線增加。

Calculation of Shrinkage Compensation Concrete Wall Stress Considering Temperature History Effect

考慮溫度歷程的補償收縮混凝土墻應力計算

Temperature Shrinkage Stress Analysis and Crack Control for Basement Wall;

地下室側墻溫度收縮應力分析與裂縫控制

Research on Solution of the Temperature and Shrinkage Crack Control in Overlong Concrete Structure;

超長混凝土結構溫度及收縮裂縫控制方法研究

Study on the Temperature Contraction Crack Control in Reinforced Concrete Cast-in-place Floor Slabs;

鋼筋混凝土樓板溫度收縮裂縫的控制研究

Status Quo and Problems of Concrete Structures Temperature and Shrinkage Cracking Control;

混凝土結構溫度及收縮裂縫控制的現狀和問題

Analysis on the cast-in-place floor temperature-shrinkage crack mechanism and anti-crack measures

淺析現澆板溫度—收縮裂縫機理及抗裂措施

On measures for controlling temperature shrinkage cracks on concrete poured concrete slab of some project

控制某工程混凝土現澆板溫度收縮裂縫的措施

On suggestions for prevention and reduction of temperature shrinkage cracks on super-long concrete

防止和減輕超長混凝土溫度收縮裂縫的建議

During the compression(or blast)phase, the temperature of the air rises and during the decompression(or suction)phase it falls.

在壓縮(或爆震)周相下,空氣溫度上升,在非壓縮(或吸收)周相下,空氣溫度則就下降。

The Research on Shrinkage Creep and Temperature Effect of Concrete Filled Steel Tubes on Long-span Arch Bridge;

大跨度鋼管混凝土拱橋收縮徐變及溫度效應研究

Too great a variation of amplitude in either temperature or humidity will aggravate the periodic contraction and expansion of the surface of rock.

溫、濕度變化振幅過大,會加劇巖壁表層周期性收縮膨脹;

最新行業英語

行業英語